Fixed Crossover Ladder

The Fixed Crossover Ladder will get the most use from a minimum amount of floor space, crossovers provide safe, convenient access over conveyors, assembly lines, piping or other obstructions.

The comfortable 48° stair slope allows worker to descend facing outward. Any combination of 6 stair heights and 5 bridge lengths is available in 3 standard widths to satisfy most requirements.

Custom sizes and configurations are also available.

Fixed Crossover Ladder Features:

• Supplied in three pieces: two stair sections and one bridge
  


• Structural frame and rails are heavy 1¼” schedule 40 pipe
  


• Standard step and bridge tread: expanded metal or serrated grating
  [Optional solid steel tread with abrasive mat on bridge is available to avoid debris falling onto conveyors]
  


• Full rails, midrails and toeboards
  


• Stair sections have 10″ step spacing with 9″ of horizontal run per step
  


• Each stair section has four legs with large, pre-drilled plates to bolt to floor
  


• Standard finish is gray enamel
  


• Rated capacity 600 lbs. Maximum use of limited floor space while complying to OSHA requirements

Fixed Crossover Ladder Specifications:

No. of Steps [each section]	Vertical Clearance [inches]	27″ Overall Width Expanded Metal Model*                 Wt. [lbs.]	31½” Overall Width Serrated Grating Model*             Wt. [lbs.]	38½” Overall Width Serrated Grating Model*             Wt. [lbs.]
2	28	CS227          253	CS231         254	CS238         276
3	38	CS327          310	CS331         325	CS338         351
4	48	CS427          378	CS431         393	CS438         428
5	58	CS527          445	CS531         465	CS538         505
6	68	CS627          517	CS631         537	CS638         583
7	78	CS727          600	CS731         630	CS738        680

Bridge Sections for Industrial Crossovers Combine any length with appropriate width stair sections Length [inches] Horizontal Clearance [inches] 27″ Overall Width Expanded Metal Model*   Wt. [lbs.] 31½” Overall Width Serrated Grating Model* Wt. [lbs.] 38½” Overall Width Serrated Grating Model* Wt. [lbs.] 20 18 -CB227     88 -CB231      95 -CS238     102 30 28 -CB327    111 -CB331      120 -CS338     128 40 38 -CB427    133 -CB431      140 -CS438     153 50 48 -CB527    156 -CB531      165 -CS538     180 60 58 -CB627    195 -CB631      203 -CS638     220 *Complete model designation includes prefix, indicating a pair of stair sections from “Stair Sections” table. Specify your choice of treads.

 

 

Titan GSE is YOUR total ground support equipment provider. We can customize any ground support equipment to suit your specifications. 

Fixed Crossover Ladder